2.4
CPU VOLTAGE
2.4.1 CPU VOLTAGE AUTO SELECTION
The CPU voltage auto detection is developed on this motherboard. Set the SW1-1 and
2, JP1 at OFF position to enable the auto detection.
Note:
SW1-1,2 and JP1 should be set at OFF and BIOS "CPU core voltage" as
Auto.
2.4.2 CPU VOLTAGE BIOS SELECTION
The CPU Voltage can be selected through BIOS setup "CPU Core Voltage
Selection". It can be set as following table:
2.2
2.8
2.9
3.2
3.3
3.52
Note:
SW1-1,2 and JP1 should be set at OFF(see Fig.4) when you select the
voltage through BIOS.
JP1
ON
1 2
Fig. 4
AMD K6 (2.2V)/K6-2
Intel MMX (P55C); Cyrix 6x86L
AMD K6 (2.9V); Cyrix 6x86MX/M II; IBM6x86MX
AMD K6 (3.2V)
Intel Pentium
Cyrix 6x86; AMD K5
Table 1
Jumper Settings
11