Pci Configuration - DTK PAM-0067V User Manual

Chapter 4
4.6

PCI CONFIGURATION

The PCI Configuration Setup option is used to configure the PCI add-on Cards on PCI
Slots. Without proper setup the PCI Add-on Cards might not function properly.
PNP OS Installed
Resources Controlled By
Reset Configuration Data
ACPI I/O Device Node
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-9 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-12 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
DMA-0 assigned to
DMA-1 assigned to
DMA-3 assigned to
DMA-5 assigned to
DMA-6 assigned to
DMA-7 assigned to
Note: Change these Settings only if user is familiar with the Chipset and all the PCI Add-on
Cards functions.
40
ROM PCI/ISA BIOS (2A5LEG3B)
PCI CONFIGURATION
AWARD SOFTWARE, INC.
: Yes CPU to PCI Write Buffer
: Manual PCI Dynamic Bursting
: Disabled PCI Master 0 WS Write
: Enabled PCI Delay Transaction
: PCI/ISA PnP PCI Master Read Prefetch
: PCI/ISA PnP PCI #2 Access #1 Retry
: PCI/ISA PnP AGP Master 1 WS Write
: PCI/ISA PnP AGP Master 1 WS Read
: PCI/ISA PnP
: PCI/ISA PnP PCI IRQ Actived By
: PCI/ISA PnP Assign IRQ For USB
: PCI/ISA PnP Assign IRQ For VGA
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
ESC: Quit
: PCI/ISA PnP
F1: Help
: PCI/ISA PnP
F5: Old Values (Shift)F2: Color
: PCI/ISA PnP
F6: Load BIOS Defaults
: PCI/ISA PnP
F7: Load Setup Defaults
: PCI/ISA PnP
Fig. 25
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
: Disabled
: Enabled
: Disabled
: Level
: Disabled
: Enabled
↑ ↓ → ←: Select Item
PU/PD/+/-: Modify