Integrated Peripherals Setup Menu - DTK PAM-0057V User Manual

4.7

INTEGRATED PERIPHERALS SETUP MENU

The Integrated Peripherals setup option is need to change the values of the I/O chipset
registers for I/O functions.
OnChip IDE First Channel
OnChip IDE Second Channel
IDE Prefetch Mode
IDE HDD Block Mode
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Secondary Master PIO
IDE Secondary Slave PIO
Primary Master UDMA
Primary Slave UDMA
Secondary Master UDMA
Secondary Slave UDMA
Onboard FDD Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART 2 Mode
IR Function Duplex
RxD, TxD Active
Onboard Parallel Port
A short description of the screen items follows:
OnChip IDE First Channel/OnChip IDE Second Channel: These items are used to enable
or disable the onboard IDE Channel.
IDE Prefetch Mode: Choose "Enabled" to set the on board IDE controller to access the IDE
device with faster Prefetch Mode.
IDE HDD Block Mode: This allows your hard disk controller to use the fast block mode to
transfer data to your hard disk drive.
ROM PCI/ISA BIOS (2A5LDG39)
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
: Enabled Onboard Parallel Mode
: Enabled
: Enabled
: Enabled
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Enabled
: 3F8/IRQ4
: 2F8/IRQ3
: HPSIR
ESC: Quit
: Half
F1: Help
: Hi, Hi
F5: Old Values
: 378/IRQ7
F7: Load Setup Defaults
Fig. 19
Award BIOS Setup Guide
: SPP
? ? ? ? ? ? : Select Item
PU/PD/+/-: Modify
(Shift)F2: Color
35