Integrated Peripherals Setup Menu - DTK PAM-0066I User Manual

4.7

INTEGRATED PERIPHERALS SETUP MENU

The Integrated Peripherals setup option is need to change the values of the I/O chipset
registers for I/O functions.
IDE HDD Block Mode
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Secondary Master PIO
IDE Secondary Slave PIO
IDE Primary Master UDMA
IDE Primary Slave UDMA
IDE Secondary Master UDMA
IDE Secondary Slave UDMA
On-Chip Primary IDE
On-Chip Secondary IDE
USB Keyboard Support
Onboard FDD Controller
Onboard Serial Port 1
Onboard Serial Port 2
Onboard IR Controller
IR Address Select
IR Mode
A short description of the screen items follows:
IDE HDD Block Mode: This allows your hard disk controller to u se the fast block mode to
transfer data to your hard disk drive.
IDE Primary Master PIO/IDE Primary Slave PIO/IDE Secondary Master PIO/IDE
Secondary Slave PIO: Available selection are "Auto", "Mode 0", "Mode 1", "Mode 2", "Mode 3"
and "Mode 4". To choose "Auto", the system BIOS will scan the IDE device and decide which
mode of the device is . Otherwise the user should key in the mode of the device to the
corresponding field.
Some harddisks cannot work properly with its corresponding timing, please set a slower
timing.
ROM PCI/ISA BIOS (2A59IG3B)
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
: Disabled IR Transmittion delay
: Auto IR IRQ Select
: Auto Onboard Parallel Port
: Auto Parallel Port Mode
: Auto ECP Mode Use DMA
: Disabled EPP Mode Select
: Disabled
: Disabled
: Disabled
: Enabled
: Enabled
: Disabled
: Disabled
: Disabled
: Disabled
: Enabled
ESC: Quit
: 3F8H
F1: Help
: IrDA
F5: Old Values
F7: Load Setup Defaults
Fig. 26
Award BIOS Setup Guide
: IRQ3
: 0
: 3BC/IRQ7
: ECP+EPP
: 1
: EPP1.9
? ? ? ? ? ? : Select Item
PU/PD/+/-: Modify
(Shift)F2: Color
41