J5 - Internal Modem Ring-In Connector; J6 - Parallel Port Connector; J7, J8 - Usb Connector - DTK PAM-0067V User Manual

Chapter 3
3.5 J5 – INTERNAL MODEM RING-IN CONNECTOR
J5 is a three pin connector which is used to connect the Internal Modem Card's
Ring-in signal to the mainboard. Thus, the mainboard can be wake up from suspend
mode through the Internal Modem Ring-in.
Fig. 12 Internal Modem Ring-in Connector
3.6 J6 – PARALLEL PORT CONNECTOR
Use the 25-way cable to connect the J6 with J6 of GOI-603 extension card.
3.7

J7, J8 - USB CONNECTOR

Use the 10-way cable to connect the J7, J8 with J5 of GOI-603 extension card.
24
Fig. 13 USB Connector