3.1
J1 – MULTIPLE FUNCTION JUMPER
J1 is a front panel multi-function jumper include speaker, reset, keylock, harddisk,
LED, ATX power switch, ACPI (suspend) LED and power button (suspend switch).
The pin definition is as following figure.
3.2
J2 – CPU FAN CONNECTION
J2 is a three pin connector, which is used to connect with the CPU FAN power
cable.
3.3
J3 – FEATURE CONNECTOR
This connector is the feature connector for VGA controller.
3.4
J4 – TV-OUT CONNECTOR
This connector is the extension connector for TV-OUT support, use the cable to
connect on board J4 pin1,2 to J4 pin1,2 of GOI-603 extension card.
Fig. 10 Multiple Function Jumper
1
2
3
Fig. 11 CPU Fan Connector
Connector Configuration
23