Raising And Lowering The Seat Assembly; Removing The Seat Assembly; Installing The Seat Assembly - Toro Workman GTX Operator's Manual

Raising and Lowering the
Seat Assembly
To raise the seat assembly, push the seat assembly
forward until it rests on the steering wheel
To lower the seat assembly, push the seat assembly
rearward until it seats back into the original position
(Figure 26).
Figure 26
Removing the Seat
Assembly
1. Push the seat assembly forward to the raised
position (Figure 26).
2. Slide the seat assembly to the side out of the
pins, and lift the seat assembly upward
27).
(Figure 26).
1. Pins
Installing the Seat
Assembly
Slide the seat assembly onto the pins and lower the
seat assembly
g190066
1. Pins
(Figure
30
Figure 27
(Figure 28).
Figure 28
g190187
g190186