Toro Workman GTX Operator's Manual page 21

Raising the Cargo Bed to the
Service Position
1. Pull the lever on left, inside of the cargo bed
toward you and lift the cargo bed up
2. Pull prop rod into the service position detent slot
to secure the bed for maintenance
Lowering the Cargo Bed
WARNING
The weight of the bed may be heavy. Hands
or other body parts could be crushed.
Keep your hands and other body parts away
when lowering the bed.
1. Raise the cargo bed slightly by lifting up on the
latch lever (Figure
2. Pull the prop rod out of the detent slot
16).
3. Lower the bed until it latches securely.
(Figure
(Figure
15).
(Figure
Opening the Tailgate
1. Ensure that the cargo bed is down and latched.
2. Using both hands, raise the tailgate using the
15).
ridge near the top of the tailgate
3. Lower the tailgate until it is flush with the bottom
16).
of the cargo bed
21
(Figure
(Figure 17).
Figure 17
17).
g034022