Accessing The Hood; Raising And Lowering The Seat Assembly - Toro Workman GTX Operator's Manual

Accessing the Hood

Raising the Hood
1. Lift up the handle of the rubber latches on each
side of the hood
Figure 26
2. Raise the hood.
Closing the Hood
1. Gently lower the hood.
2. Secure the hood by aligning the rubber latches
onto the latch anchors on each side of the hood
(Figure 26).
(Figure 26).
Raising and Lowering the
Seat Assembly
To raise the seat assembly, push the seat assembly
forward until it rests on the steering wheel
To lower the seat assembly, push the seat assembly
rearward until it seats back into the original position
(Figure 27).
g008402
30
(Figure
Figure 27
27).
g190066