Table of Contents
Advertisement
9. Click the Accept Changes button and that should be the last of the configuration.
EAS Testing with Monroe Box
1. To force the Monroe box to do a test and send an SCTE18 message, press the
Select button on the front panel of the unit TWO TIMES.
This will cause the unit to:
a. Display an EAS screen on the CVBS video output
b. Send two SCTE18 messages
c. Start playing the alert audio
2. The SCTE18 messages will continue to be sent during the playing of the EAS
audio message every 6 seconds. When the EAS audio messageplaying is
finished, the SCTE18 messages will no longer be sent.
3. When the OmniHub 6/6 receives the first SCTE18 message on the management
port, it should trigger it to replace all services on the output with an encoded
version of the Monroe video and audio outputs. 15 seconds after the last
SCTE18 is received, the OmniHub 6/6 should return all services to their original
content.
APPENDIX C - Specification
OmniHub 6/6D - Base unit
Includes -
Systems -
Chassis Dimension
Front Panel
Rear Panel
Remote Operation/Update Interface -
Type
Front Panel Indicators
Connector
Operating Temperature -
Storage Temperature -
Operating Humidity -
AC Power -
Operating Voltage
PSU Max Power
Line Cord
Page 97 of 113
OmniHub 6/6D – User Manual
1RU chassis/case, power supply/line
cord
445mm x 44mm x 428mm
(W x H xD), 1RU
4 Gigabit Ethernet port
6 Hot Swappable Slot for 6 modules
Single/Dual Power Supplies
Ethernet, 10/100
Link (Green LED). Activity (Amber LED)
RJ45
0 to 50°C
-10 ~ 70°C
<95%
100 ~ 240VAC
120W
Detachable, 3-prong
Advertisement
Table of Contents
