Table of Contents
Advertisement
Network tab allows you to assign a static IP address to the OmniHub 6/6D mainboard
only. IP addresses for boards/modules will be assigned automatically based on the
address set for the chassis. To avoid IP address conflicts when you set the baseboard IP
address, observe occupied IP sections displayed on this page in the top blue area.
Click the button
Time tab allows you to check the current system time, change the time zone, choose
system time Mode (Manual or Automatic), enable/disable Auto Sync and modify NTP
Server Address in Automatic mode and change the current system Time in Manual
mode.
Click the button
System tab allows you to do upgrade, import or export configuration, import or export
licenses (only baseboard), reboot the whole unit, restore to factory default (only
baseboard) and export logs and clear log (only baseboard).
Page 22 of 113
OmniHub 6/6D – User Manual
on the right side for the changes to take effect.
on the right side for the changes to take effect.
Advertisement
Table of Contents
