Sencore OmniHub 6 User Manual page 49

Hide thumbs Also See for OmniHub 6:
Table of Contents

Advertisement

Video Bitrate
(Kbps)
Audio Encoder
Details
Audio Type
Delays (ms)
Shelter
Parameters
Shelter
Y
Height
3.4.1.3 Output
For the Output, both models have direct IP output and multiplexing. But only OHE6-
HDMI-R01 has RTMP output settings.
Direct IP output is specifically for encoding a single program and outputting it directly to
IP. This setting will not occupy multicast bandwidth baseboard.
If you want to use IP output channel on the encoder module and the baseboard IP
module at same time, you should avoid the multicast IP addresses conflicts. If there are
two same IP addresses enabled meantime, all the multicast videos will be affected.
Page 49 of 113
OmniHub 6/6D – User Manual
1920×1080_50i ,
1920×1080_30p ,
1920×1080_25p ,
1080×720_60p ,
1080×720_50p ,
720×480_60i ,
720×576_50i
600~12000
Range
MPEG1_Layer2
AC3
AAC
-2000~2000
Range
Enable/Disable
0~1080 (Dual)
2~1080 (Dual)
OHE6-HDMI-00
Video Aspect
Ratio
Audio Encoder
Details
Volume (dB)
Audio Bit rate
(Kbps)
Shelter
Parameters
X
Width
Color
16x9 (HD)
4x3 (SD)
Range
-20~20
32~192
(MPEG1_Laye
r2 / AAC)
96~192
(AC3)
Range
0~1920 (Dual)
2~1920 (Dual)
White/Black/Bl
ue/Green/Red

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omnihub 6d

Table of Contents