Table of Contents
Advertisement
To use Multiplexing mode on service level:
1. Click on
(pencil) icon. There will always be a BaseBoard selection for the IP
output and other Output options depending on the module inserted.
2. Select the correct Output and Channel you want to output the service to.
3. Check Multiplex on the channel you want to outputt. You can output multiple
services to one channel or output one service to multiple channels.
3.4.3.4
EAS Settings
When the EAS source is triggered, the Audio and Video from the encoder will be
replaced by the Audio and Video from the EAS module.
3.4.3.5
System Operation
System tab allows you to perform the following tasks:
- Import / export license
- Log manages
- Reboot
- Factory Default
Page 61 of 113
OmniHub 6/6D – User Manual
Advertisement
Table of Contents
