Table of Contents
Advertisement
1. Click on
(pencil) icon. There will always be a BaseBoard selection for the IP
output and other Output options depending on the module inserted.
2. Select the correct Output and Channel you want to output the service to.
3. Check Multiplex on the channel you want to outputt. You can output multiple
services to one channel or output one service to multiple channels.
3.4.2.4
EAS Settings
When the EAS source is triggered, the Audio and Video from the encoder will be
replaced by the Audio and Video from the EAS module.
On this page, you need to input the EAS Source Multicast Address, Command port and
Data port. This information can be seen on the EAS page.
3.4.2.5
System
System tab allowsyou to perform the following tasks:
- Import / export license
- Log manages
- Reboot
- Factory Default
To open the log management menu, click on the Open button. The newly opened menu
allows you to enable / disable logging.
Page 57 of 113
OmniHub 6/6D – User Manual
Advertisement
Table of Contents
