Assa Abloy Norton 7970DPS-B Series Installation Instructions Manual

ASSA ABLOY
Typical Installation
•One track & closer position for all door opening angles
•Easy arm attachment
•Removable Frame Stop Required*-Not Shown
Hinge or
Pivot
Right Hand Door-RH
Left Hand Reverse-LHR
*Not required when frame rabbet exceeds 2-3/16"
Copyright © 2001, 2014 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
Installation Instructions
Series 7970DPS-B, & 7970DPS-OP
For wood or metal doors 1- ¾" to 2 -1/4" (45-57mm) thick
Overhead Concealed
Security Door Closers
with Door Position Switch
Non-Hold-Open Models
hung in a hollow metal frame
standard butt hinges or offset pivots
An incorrectly installed or improperly
adjusted door closer can cause property
damage or personal injury. These instructions
should be followed to avoid the possibility
of misapplication or misadjustment.
Left Hand Door-LH
Right Hand Reverse-RHR
CAUTION
Hinge or
Pivot
80-9379-1601-020 (06-14)