Figure 25: Import Raw Data Parameters; Figure 26: Raw Data Imported; Figure 27: Measuring Cadence - Grandstream Networks UCM6 Series Manual

Figure 25: Import Raw Data Parameters

3. The result will be similar to the following figure:

Figure 26: Raw Data Imported

Step 3: Measuring Cadence
Once the RX raw file is successfully imported, we can now measure ringing and silence duration that will
corresponds to cadence value (Cadence= Ringing duration/Silence duration).
Below is an example on how to measure silence and tone duration using the imported RX raw file.

Figure 27: Measuring Cadence

P a g e | 23
UCM6XXX Analog Trunks Guide