Create Outbound Routes; Figure 7: Inbound Rules With Time Condition; Figure 8: Inbound Rules Created - Grandstream Networks UCM6 Series Manual

Once the inbound rule is created, it can be edited anytime by clicking on
icon.
In the above example, incoming calls during office hours will be routed to IVR, otherwise calls will be routed to
extension 100 (default destination).

Create Outbound Routes

1. Go to Extension / TrunkOutbound Routes.
2. Click on "Add", the following figure will appear.
3. Enter the Calling Rule Name, Pattern and choose the Analog trunk in Use Trunk.

Figure 7: Inbound Rules with Time condition

Figure 8: Inbound Rules Created

UCM6XXX Analog Trunks Guide
icon or deleted by clicking on
P a g e | 12