Create Outbound/Inbound Rules
In this section, we will give an example of creating Outbound and Inbound Rules for connected analog lines to
FXO ports, in order to allow making and receiving calls via Analog Trunks.
Create Inbound Routes
1. Go to Extension / TrunkInbound Routes.
2. Click on "Add", the following figure will appear.
3. Select Analog Trunk created and Default destination (IVR, extension, ring group...).
Figure 5: Analog Trunk Created
Figure 6: Create New Inbound Rules
UCM6XXX Analog Trunks Guide
P a g e
|
11