Graco E-Flo Installation Manual page 86

Kits and Accessories
F . 67
IG
10. connect the Ethernet/IP, DeviceNet, or PROFIBUS
cable to the fieldbus connection on the CGM as
applicable.
F . 68: CGM Fieldbus Connection
IG
11. Connect the other end of the Ethernet/IP, Devi-
ceNet, or PROFIBUS cable to the fieldbus device.
86
ADM
Fieldbus
Connection
CGM Bracket
CGM Base
(DC)
12. Refer to the Graco Control Architecture Module pro-
gramming manual for step-by-step instructions on
how to update the software version of GCA mod-
ules. See Related Manuals on page 3.
13. Refer to the E-Flo iQ Supply System Operation
manual for details regarding the feildbus pinout
setup and to perform the setup procedure to config-
ure the feildbus. See Related Manuals on page 3.
Ram post bracket
1/4-20 x 0.5 in.
M4-0.7 x 20 mm
CGM (DC)
M4-0.8 x 45 mm
333586E