Recycling And Disposal; End Of Product Life - Graco E-Flo Installation Manual

Reinstall Platen Wipers
NOTE: Five gallon Platens have a single Wiper that
must be reinstalled, and 55 gallon Platens have a top
and bottom Wiper that must be reinstalled.
1. Using a wooden or plastic tool to prevent damage to
the Wiper (EB), clean all material from the seal
grooves.
2. Working from the bottom, angle one Wiper (EB)
over the back of the Platen (AD). See F
3. Insert the Wiper (EB) in the top groove and run the
front of the Wiper into the groove.
4. If using a 55 gallon Platen, insert the second Wiper
(EB) in the lower groove and run the front of the
Wiper into the groove.
5. Lubricate the outside of the Wiper with lubricant
compatible with the material being pumped. Check
with the material supplier.
5 Gallon Platen
55 Gallon Platen
F . 42
IG
333586E

Recycling and Disposal

End of Product Life

At the end of the product's useful life, dismantle and
recycle it in a responsible manner.
• Perform the Pressure Relief Procedure.
. 42. • Drain and dispose of fluids according to applicable
IG
regulations. Refer to the material manufacturer's
Safety Data Sheet.
• Remove motors, batteries, circuit boards, LCDs
(liquid crystal displays), and other electronic
components. Recycle according to applicable
regulations.
• Do not dispose of batteries or electronic
components with household or commercial waste.
• Deliver remaining product to a recycling facility.
EB
EB
TI10614A
Maintenance
45