CHAPTER 4
FIGURE 10. RS1 Roof Bracket Assembly
Front Bracket
4. Place the RS1 unit roof bracket on the cab with it oriented as shown in Figure 11 on page 16. The holes on the
corners of the roof bracket will line up with existing cab top mounting holes.
FIGURE 11. RS1 Roof Bracket Orientation
Latch Hole
5. Secure the roof bracket utilizing the cab's mounting hardware.
6. Insert the two tabs on the RS1 mounting bracket into the roof bracket slot.
7. Insert the latch into the hole on the roof bracket and secure in place by pressing down on the handle.
NOTE:
The latch may need to be adjusted to provide proper compression. To do this, tighten the nut on the
bottom of the latch.
16 RoGator RG900, RG1100, and RG1300 Model Year 2012-2014 (Steer-Ready) - RS1/HDU Installation Manual
Notch Bracket
Front of Machine
Bolt
Lock Washer
Back Bracket
Latch Bracket
RS1 Bracket to
Roof Bracket
Slots