Actuator Nameplate; Material Numbers; Label When An Adjustable Packing Is Installed - Samson 3241 Series Mounting And Operating Instructions

Markings on the device
The valve nameplate (80) in valve sizes
DN 15 to 150 is affixed to the flange
(Fig. 2-2). The valve nameplate in valve sizes
DN 200 and larger is located on the yoke
(Fig. 2-3).
80
Fig. 2-2: Nameplate
on the
flange

2.2 Actuator nameplate

See associated actuator documentation.

2.3 Material numbers

The seat and plug of the valves have an item
number written on them. You can contact us
stating this item number to find out which
material is used. Additionally, a seat code is
used to identify the trim material. This seat
code is specified on the nameplate.
2-2
80
Fig. 2-3: Nameplate
on the yoke
2.4 Label when an adjustable
packing is installed
An instructional label is affixed to the valve
when an adjustable packing is installed (see
Fig. 2-4).
Fig. 2-4: Label when an adjustable packing is
installed
EB 8015 EN