Lifting The Valve - Samson 3241 Series Mounting And Operating Instructions

− Protect the piping and any mounted
valve accessories against damage.
− Protect the control valve against moisture
and dirt.
− The permissible transportation tempera-
ture of standard control valves is –20 to
+65 °C.
Fig. 4-1: Lifting points on the control valve: up to DN 150 with flanges (left) and with welding ends
(middle) · DN 150 and larger with additional lifting eyelet on the actuator (right)
EB 8015 EN
Shipment and on-site transport
Note
Contact our after-sales service for the trans-
portation temperatures of other valve ver-
sions.
4.3.2

Lifting the valve

To install a large valve into the pipeline, use
lifting equipment (e.g. crane or forklift) to lift
it.
4-3