Safety Instructions - involight ALPINA600 User Manual

1.2 Safety instructions:

Operating Conditions.
WARNING!
This product has been designed for indoor use only.
To prevent damage, do not expose the unit to liquid or moisture.
Avoid direct sunlight, strong dirt and strong vibrations. Never operate the fog machine without mist. The device
must never be positioned more inclined than 20 ° during operation. To protect the device from vibration, dust
and moisture during transport and storage, use the original packaging or its own special transport or storage
packaging
Electric shock due to improper mains connection.
DANGER!
This product corresponds to the protection class I in its design and may only be operated at a socket with
protective contact. Use only the included power cable for connection. Do not modify the power cord or plug and
check the insulation of the cable regularly for damage. Failure to do so may result in electric shock, fire or life.
In case of uncertainties, contact an authorized electrician.
Electric shock due to high voltages inside the device.
DANGER!
The device contains components that are subject to a high electrical voltage. Do not modify or disassemble the
unit. There are no user-serviceable components inside the device. Failure to do so may result in electric shock,
fire or life.
Disconnection from the mains.
NOTE!
The mains plug is the main disconnect element. Unplug the power cord from the power source. Make sure that
the outlet is near the unit and is easily accessible.
WARNUNG!
Vor Befüllen des Tanks Netzstecker ziehen.
Das Befüllen des Tanks darf ausschließlich bei gezogenem Netzstecker erfolgen.
Protect from humidity and moisture!
WARNING!
Ensure that no mist or other fluids run over the housing or housing parts and get into the interior of the unit. Be
careful not to allow the unit to get wet due to rain, do not use it near water or under humid or wet conditions. If
spilled fluid or other liquids have spilled into the unit or if there is a suspicion of a leak within the unit, this must
not be put into operation. Failure to do so may result in electric shock, fire or life!
ATTENTION
Slipping.
!
The ejected snow fluids can leave a liquid film on surfaces. This can lead to considerable skidding on floor
coverings with a smooth surface.
10