Safety Instructions - involight SLIMPAR710PRO User Manual

1.2 Safety instructions:

This information sheet contains important information of safety operation of the device. Ensure that this
information is available to all persons using this device.
The rating plate is located on the bottom of the product.
Please read all warnings and operating instructions carefully before using this unit. Keep this manual for future
reference. Please follow all instructions in this manual.
DANGER!
Electric shock due to improper mains connection.
This product corresponds to the protection class I and must be operated with a socket connected to GND. Use
only the supplied power cord to connect. Do not modify the power cord or plug, and check the insulation of the
cable regularly for damage. Damage of power cord can cause electric shock, fire or death. In case of
uncertainties, contact an authorized electrician.
Electric shock due to high voltages inside the device.
DANGER!
The device contains components that are subject to a high electrical voltage. Do not modify or disassemble the
unit. There are no user-serviceable components inside the device. Failure can cause electric shock, fire or
death.
Disconnection from the mains.
NOTE!
The mains plug is the main disconnect element. Unplug the power cord from the power source. Make sure that
the power outlet is close to the unit and is easily accessible.
Operating conditions.
WARNING!
To avoid damage, do not expose the unit to liquids or moisture. If there is a suspicion that liquid may have
penetrated into the device, the device must be immediately disconnected from the mains. This also applies if
the unit is exposed to high humidity. Even if the device still seems to work, it must be checked by an expert
whether the liquid penetration may have been impaired. Reduced insulation can cause fatal electric shocks.
Avoid direct sunlight, strong dirt and strong vibrations.
Eye injuries due to high light intensity.
WARNING!
Never look directly into the light source. A direct view into the beam can lead to retinal burns and must be
avoided at all circumstances.
Risk of epileptic seizure
WARNING!
Avoid long periods of continuous flashing and, in particular, flash frequencies between 10 and 20 flashes /
second, as epileptic seizures can be triggered in susceptible individuals (especially for epileptics)
Risk of fire.
NOTE!
Never cover the unit or the ventilation slots. Do not mount the unit directly next to a heat source. Keep the
device away from the fire and heat.
WARNING! Do not leave the packaging material careless. Plastic films, Styrofoam parts etc. could be a dangerous toy for
children!
19