Safety Instructions - involight BM100 User Manual

1.2 Safety instructions

Operating conditions.
WARNING!
This product is designed for indoor use only.
To avoid damage, do not expose the unit to liquids or moisture.
Avoid direct sunlight, strong dirt and strong vibrations. Never operate the fog machine without proper fog
fluid. The device must never be positioned more inclined than 20 ° during operation. To protect the device from
vibration, dust and moisture during transport and storage, use the original packaging or its own special
transport or storage packaging
Electric shock due to improper mains connection.
DANGER!
This product corresponds to the protection class I in its design and may only be operated at a socket with
protective contact. Use only the supplied power cable for connection. Do not modify the power cord or plug,
and check the insulation of the cable regularly for damage. Failure to do so may result in electric shock, fire or
life. In case of uncertainties, contact an authorized electrician.
Electric shock due to high voltages inside the device.
DANGER!
The device contains components that are subject to a high electrical voltage. Do not modify or disassemble the
unit. There are no user-serviceable components inside the device. Failure to do so may result in electric shock,
fire or life.
Disconnection from the mains.
NOTE!
The mains plug is the main disconnect element. Unplug the power cord from the power source. Make sure that
the power outlet is close to the unit and is easily accessible.
Before filling the tank pull the mains plug.
WARNING!
The tank must be filled only when the mains plug is disconnected.
Protect from water and moisture!
WARNING!
Ensure that no soap bubble fluid or other fluids run over the housing or housing parts and enter the interior of
the unit. Be careful not to allow the unit to get wet due to rain, do not use it near water or under humid or wet
conditions.
If spilled bubble fluid or other liquids have entered the unit or if there is a suspicion of a leak inside the unit, this
must not be put into operation. Failure to do so may result in electric shock, fire or life!
CAUTION!
DANGER OF SLIPPING.
The ejected soap bubbles can leave a liquid film on surfaces. This can lead to considerable skidding on floor
coverings with a smooth surface.
11