Safety Instructions - involight Paint BAR UV12 User Manual

1.2 Safety instructions:

This information sheet contains important information on the safe operation of the device. Ensure that this
information is available to all persons using this device.
The type plate is located on the underside of the unit.
Please read all warnings and operating instructions carefully before operating this unit. Please keep this manual
for future reference. Please follow all instructions in this manual.
DANGER!
Electric shock due to improper mains connection.
This product corresponds to the pRedection class I in its design and may only be operated at a socket with
pRedective contact. Use only the supplied power cord to connect. Do not modify the power cord or plug and
check the insulation of the cable regularly for damage. Failure to do so may result in electric shock, fire or life
danger. In case of uncertainties, contact an authorized electrician.
Electric shock due to high voltages inside the device.
DANGER!
The device contains components that are subject to a high electrical voltage. Do not modify or disassemble the
unit. There are no user-serviceable components inside the device. Failure to do so may result in electric shock,
fire or danger to life.
Disconnection from the mains.
NOTE!
The mains plug is the main element for electrical power. Unplug the power cord (mains plug) from the power
source. Make sure that the outlet is near the unit and is easily accessible.
Operating conditions.
WARNING!
This product is designed for indoor use only. To prevent damage, do not expose the unit to liquid or moisture. If
there is a suspicion that liquid may have penetrated into the device, the device must be immediately
disconnected from the mains. This also applies if the unit is exposed to high humidity. Even if the device still
seems to work, it must be checked by an expert whether the liquid penetration could possibly impair the
insulation. Reduced insulation can cause fatal electric shocks. Avoid direct sunlight, dirt and strong vibrations.
Eye injuries due to high light intensity.
WARNING!
Never look directly into the light source. A direct view into the beam can lead to retinal burns and must be
avoided at all circumstances.
Risk of epileptic seizure.
WARNING!
Avoid long periods of continuous flashing and, in particular, flash frequencies between 1 and 20 flashes /
second, as epileptic seizures can be triggered in susceptible individuals (especially for epileptics).
Risk of fire
NOTE!
Never cover the device or the ventilation slots. Do not mount the device directly next to a heat source. Keep the
device away from fire.
14