3D Histech Pannoramic DESK II User Manual page 48

Pannoramic DESK II 1.22 User's Guide
Navigation tool and Preview toolbar
This section is located at the bottom of the preview image.
June 24, 2016 - Rev. 1
Areas that will be scanned
These areas are digitized on the basis of user settings (for example, Fill holes in
scan area) and not detected by the selected threshold value.
Detected sample areas that will be scanned
These areas are digitized. They are detected on the basis of the selected
threshold value.
Detected sample areas that will not be scanned
These areas are not digitized on the basis of their position (for example, they
are outside the selection box). They are detected by the selected threshold
value.
Marker
If Scan area inside the marker is selected in the Preview tab, the preview
camera detects the marker pen. The inside areas appear in red color and will
be digitized.
Areas scanned in
This color is only displayed during scanning.
Figure 26 – Navigation tool and Preview toolbar
3DHISTECH Ltd.
4 Software Description
48(76)