3D Histech Pannoramic DESK II User Manual page 25

Pannoramic DESK II 1.22 User's Guide
7. When you close the door, barcode detection and preview image creation start
automatically.
The preview image is displayed in the preview area of the control software.
To remove a slide:
1. Click
load/unload position
2. Open the slide insert door (1) by pushing it to the left.
3. Open the fixing lever (2) by pulling it to the left.
4. Remove the slide (4).
5. Insert another slide or close the fixing lever (2) and the door (1).
The slide insert door is equipped with an interlock switch. It
automatically stops a running digitization process when the slide insert
door is opened.
June 24, 2016 – Rev. 1
in Pannoramic DESK II control software. The specimen holder moves to the
Note:
3DHISTECH Ltd.
3 Preparing Slides
25(76)