3D Histech Pannoramic DESK II User Manual page 57

Pannoramic DESK II 1.22 User's Guide
Toolbar for live images
The toolbar is only available for the displayed live image, but not available for camera images during
digitization.
– Zoom in
•
– Zoom out
•
– One pixel on the monitor corresponds to one pixel on the camera
•
– The live image completely fills the display area
•
– Displays or hides the vertical and horizontal scale bars
•
– Displays the magnifier window
•
– Activates red marking on overexposed pixels
•
– Recalculates exposure time (useful if too many overexposed pixels were
•
– Calculates white balance (only for color cameras)
•
– Saves the current image as BMP or JPEG file
•
Fast live mode – live images are displayed with a frequency of at least 10 images per
•
second. If an exposure time is set to more than 100 ms, the pixel values are multiplied
accordingly (for example, if an exposure time of 200 ms is set, the pixel values are
multiplied by 2, and the exposure time is reset to 100 ms). Therefore the resulting images
will have a higher noise level.
Normal live mode – images are taken with the user-specified exposure time.
•
Status bar
Current position of the cursor related to the live image
•
RGB value of current pixel
•
Zoom level of the current live image
•
June 24, 2016 - Rev. 1 3DHISTECH Ltd.
4 Software Description
detected)
57(76)