3D Histech Pannoramic DESK II User Manual page 51

Pannoramic DESK II 1.22 User's Guide
Set the type of TMA block on this panel.
1. Select the shape of the TMA spots (Rectangle spots or Circle spots).
2. Enter the number of rows and columns in the Rows and Columns fields or select the
3. Enter the distance between two spots on the X and the Y axis in µm (in the Spot
4. Enter the average diameter of the spots in the Diameter of spots (µm) field or
Grid tab
The Grid tab displays the previously set grid settings
Move tab
The Move tab allows the rotation and moving of the TMA selection spots that are displayed
on the preview image.
•
•
June 24, 2016 - Rev. 1
appropriate values with the arrows.
distance X (µm) and Spot distance Y (µm) fields or select the appropriate values
with the arrows.
select the appropriate value with the arrows.
Figure 30 – TMA tool: Grid
To move the spots enter the pixel value in the Move field or use the arrows.
To rotate the spots, enter the degree value in the Rotate field or use the rotation
arrows.
3DHISTECH Ltd.
4 Software Description
51(76)