Event Call Settings - 3D Histech Pannoramic DESK II User Manual

Pannoramic DESK II 1.22 User's Guide

4.2.4 Event Call Settings

By moving the mouse cursor over the
setting you are interested in. Two of the three settings are responsible for opening external
applications (.exe or .bat) as defined (for example, Pannoramic Viewer software can be opened after
scanning is finished).
You can define external application call settings for the following cases:
Slide Scanning Finished
•
Scanning Error Occurred
•
For Slide Scanning Finished and Scanning Error Occurred you can define the external software by
entering the file path in the Application box, or by browsing for it by clicking
parameters in the Parameters box, it will pass them to the software that it starts. If no parameter is
defined, then the parameter will not be passed. The default parameters are the following:
For Slide Scanning Finished: "<SLIDENAME>" – transfers the slide name
•
For Scanning Error Occurred: "<ERRORTEXT>" – transfers the error message
•
June 24, 2016 - Rev. 1
Figure 15 – Event Call Settings
buttons, the software displays information about the
3DHISTECH Ltd.
4 Software Description
. If you define
37(76)