3D Histech Pannoramic DESK II User Manual page 9

Pannoramic DESK II 1.22 User's Guide
Disconnect plug!
Warning!
Warning!
Caution!
Caution!
Crush hazard!
Warning!
Warning!
Warning!
June 24, 2016 – Rev. 1
Remember to unplug the power cord before you open the Pannoramic DESK II
device.
Only connect external devices that are safety extra low voltage rated to the
instrument to avoid the risk of electrical shock.
The Pannoramic DESK II does not include any special facilities to protect from
samples with an etching, potentially infectious, toxic, radioactive or other
health-damaging effect. You are under obligation to comply with all currently
binding legislation, notably, national accident prevention rules when handling
samples of this kind.
Dirt or dust may adversely impact the operating capability of the Pannoramic
DESK II. For this reason, measures must be taken to eliminate such influences to
a maximum possible degree. During periods of non-use, the Pannoramic DESK II
must be protected with a dust cover. Check that power is turned off before you
put the cover on.
Avoid touching the lamp bulb. Disconnect power plug and let the lamp cool
down for about 15 minutes before replacing the lamp.
Never open the front door unless prompted accordingly by software. When you
open the door at any other time, make sure not to reach with your hands into the
instrument to avoid the risk of crushing your fingers.
The front door is equipped with an interlock switch. If the door is opened while a
digitization process is running, the process will be stopped instantly.
A defective Pannoramic DESK II is not classified as domestic waste. It must be
properly disposed in accordance with currently valid legal requirements.
The Pannoramic DESK II may not be operated by other than properly instructed
persons. Operating personnel must be fully aware of the potential dangers
which a particular field of application involves. The Pannoramic DESK II is a
precision instrument which may suffer a significant reduction in operational
functions or even physical destruction following intervention performed in any
nonconforming manner.
3DHISTECH Ltd. 9(76)