3D Histech Pannoramic DESK II User Manual page 28

Pannoramic DESK II 1.22 User's Guide
You can only scan the barcode type that you have previously set. If you
want to read several barcode types, you always have to set the current
barcode type before reading it.
Functions
To move the specimen holder to load/unload position, click
•
slide when it is in this position.
Ensure that the slide is not tilted, and that it rests perfectly horizontally
on the stage.
To display an image of the barcode area, click
area by dragging the edges of the green square.
To check whether the barcode reading settings are correct, display the barcode digits in the Barcode
field by clicking
If you did not set the barcode type correctly, or there is no barcode in
the barcode area, the software will display the following error
message: "Barcode detection unsuccessful! There might be no barcode
present."
June 24, 2016 - Rev. 1
Note:
Caution!
.
Note:
3DHISTECH Ltd.
. You can redefine the barcode reading
4 Software Description
. You can replace the
28(76)