Start Scan; Scan To Server - 3D Histech Pannoramic DESK II User Manual

Pannoramic DESK II 1.22 User's Guide

4.3.8 Start Scan

To start digitization process, click
Before starting digitization process ensure that you have enough free
space on the destination drive. You can check the available free disk
space in the last line (Available disk space) of the information area of
Scan Progress.
You can interrupt a running digitization process by clicking
digitization process is in progress.

4.4 Scan To Server

The ScanToServer function is available for you to scan directly to a dedicated CaseCenter server.
To setup connection with a designated server, follow the steps below:
1. Click Scan Options on the Routine Work tab panel.
June 24, 2016 - Rev. 1
Caution!
Figure 37 – Scan Options button
3DHISTECH Ltd.
after checking all settings.
4 Software Description
. This button is only enabled if a
58(76)