Running The "Statistics" Application - Sartorius Cubis MCA10202S Series Operating Instructions Manual

Operation
66 Cubis ® MCA Operating Instructions

8.13.2 Running the "Statistics" Application

The "Statistics" application saves up to 100 weight values and evaluates these
statistically .
The following values are saved and exported by the statistics application:
− Number of components
− Mean value
− Standard deviation
− Variation coefficient
− Sum of all values
− Lowest value (minimum)
− Highest value (maximum)
− Spread: Difference between maximum and minimum
The "Statistics" application can be combined with the following functions:
− Unit Change, only available in the weighing display, before saving the initial
weight value
− ID marking
− Automatic taring
Procedure
Open the main menu .
t
Start the task for the "Statistics" application .
t
Zero the device .
t
Place the sample on the weighing pan .
t
To start the recording of the statistics: Press the [Confirm] button on the keypad .
t
The current weight value is saved and the device is automatically tared .
y
To save the next value: Place a new sample on the weighing pan and press the
t
[Confirm] button .
To display an overview of the saved data: Press the [Report] button .
t
To print the current statistics: Press the [Print] button .
t
To exit the current statistics, and to delete the saved values: Press the [Exit]
t
button .