Conformity-Assessed Devices; Symbols On The Device - Sartorius Cubis MCA10202S Series Operating Instructions Manual

Device Description
14 Cubis ® MCA Operating Instructions
3.6

Conformity-assessed Devices

Some settings of conformity-assessed models are protected against user changes,
e .g . "external calibration" for devices in accuracy class II . This measure is intended to
ensure the suitability of the devices for use in legal metrology .
3.7

Symbols on the Device

1
Fig . 6: ID label on the device (example)
Pos. Designation
1 Manufacturer's ID label
Description
Displays the metrological data of the device .
Conformity-assessed models only