Before Installation - Fisher & Paykel ACTIVESMART RS32A72 Installation Manual

IMPORTANT!
Be careful when unpacking to prevent damage to the surface of your appliance.
●
Ensure that the appliance is stable to prevent from tipping over when unpacking.
●
Do not open the doors to prevent the appliance from tipping over.
●
The appliance is heavy and requires a minimum of 2 persons to unpack and install.
●
Checking your appliance
Detach accessories box taped to
1
back panel of appliance.
Refer to 'Components' (page 5).
IMPORTANT!
Be aware when removing the
carton that the accessories box
may have dislodged from
the rear of the appliance during
transit.
Remove the water fittings and water filter
2
kits, Installation kit, and Miscellaneous
items pack from inside the appliance.
Refer to 'Components' (pages 4 – 5).
Water fittings and
Water filter kits Installation kit
!1
ACTIVESMART™
INTEGRATED REFRIGERATOR
RS90A, RS9120W,
RS36A72, RS36A80 & RS36W80 models
USER GUIDE
NZ AU GB IE HK SG IN US
Miscellaneous
items pack

BEFORE INSTALLATION

Ensure that the feet of the appliance are retracted.
●
If the appliance is damaged, contact your Fisher & Paykel dealer.
●
Take note of your model and registration numbers located at the lower right side of
●
the appliance. You will need these to request for servicing or repair of your appliance.
Moving your appliance
Remove the brackets from one side of the
1
appliance. (For single door models, remove the
brackets on the non-hinged side of the appliance.)
Note: Location of brackets depends on the
model of your appliance.
Restrain the appliance
4
to the cart with straps.
Remove the brackets
5
on the other side of
the appliance.
Tilt the appliance Insert the hand truck
2 3
slightly to the under the side of the
opposite side. appliance where the
brackets were removed.
Do NOT insert the hand
truck to the front or
back of the appliance.
hand truck
Tilt the appliance backward
6
onto the cart.
Set aside the pallet and
7
push the cart to the
installation location.
17