Table of Contents
Advertisement
Available languages
Available languages
IMPORTANT!
Ensure your appliance is not exposed to any heat generating appliances eg cooktop, oven or dishwasher.
●
●
The appliance must be installed by a qualified installer, or Fisher & Paykel trained and supported service technician to avoid faulty electrical connection.
●
●
All connections for electrical power and grounding must comply with local codes and ordinances and be made by licensed personnel when required.
●
●
Avoid installation of the appliance/s under a ground fault circuit interrupter (GFCI).
●
●
Ensure the appliance is installed properly. Improper installation that results in appliance failure is not covered under the appliance warranty.
●
●
Check the installation location
Cabinetry
Check the dimensions of the cabinetry (width, depth, height, floor level, finished alcove returns).
●
●
Ensure that the ventilation openings in the cabinetry are clear of obstruction.
●
●
Power supply connection
Ensure that there is a separate power outlet for the appliance.
●
●
Avoid sharing the power point with other appliances to prevent the appliance from accidentally switching off.
●
●
For power requirements, refer to the information on the serial plate.
●
●
Ensure your appliance is properly grounded (earthed).
●
●
Connect your appliance to an electrical supply with the fitted plug and lead.
●
●
We recommend to use an isolating switch that is easily accessible to the user after the appliance is installed.
●
●
Your appliance
Ensure that your appliance is the correct model as per your order.
●
●
Ensure that the packaging is not damaged upon delivery.
●
●
Check that the components and install kits are complete.
●
●
8
8
BEFORE INSTALLATION
Advertisement
Chapters
Table of Contents
