Dimensions apply for the preparation and installation of custom door panels. For Dwg and Dxf files of the below panel preparation download the folder on http://thekitchentools.fisherpaykel.
com/downloads/.
13 1/2" (342.3mm)
2 3/16" (54.8mm)
Ensure handle is mounted
65mm from inner edge of panel
to the center — this will avoid
interference with brackets.
All measurements to be made
from inner bottom corner.
For the second panel mirror
and repeat dimensions using
inner bottom corner as the
reference point.
4 5/16" (364mm)
TOP PANEL — REAR VIEW
10
7
CUSTOM DOOR PANEL INSTALLATION DIMENSIONS — RS32A72
Ø 2mm REF
12x Pilot holes recommended for bracket attachment.
(Do not penetrate front surface).
1 3/8" (34.7mm)
1 3/8" (34.7mm)
13 3/16" (335mm)
4 3/8" (111.5mm)
1 1/8" (29.1mm)
All measurements to be made
3 7/16" (87.2mm)
from top and centerline.
14 7/16" (366mm)
Cut outs are located in attachment bracket for Fisher & Paykel handles only.
If locating custom handle in the shaded area above, ensure handle screw heads
are counter sunk into back of panel to avoid interference with hanging bracket.