Internal box
IMPORTANT!
Lower the feet until it engages the floor to provide more stability to the
appliance and prevent back and forth movement.
Install
X
fasteners kit
#8Gx16 flat head screw
(2)
Tools
Cross-head screwdriver
#8 x 16
Mush Washer
Twin Thread
Philips Screw
Powered driver (optional)
Secure the top trim to cabinetry
1 Secure the top trim to the ceiling of the cabinetry
with
Repeat on the opposite side.
2 Lower the feet until it engages the floor to provide
more stability to the appliance and prevent back
and forth movement.
36
(A).
#8Gx16 flat head screws
@1
FIXING TO CABINETRY
A
Reattach the hinge end caps
3 Reattach the left hinge end cap (B).
Align hinge cap to the appliance, press
z
and firmly slide the cap to the right.
Hold onto the corner of the end cap,
z
firmly push up and to the left to engage
securing hook. Ensure cap is flush
with the appliance.
B
Reattach right hinge end cap (C).
4
– Align hinge cap to appliance, press
– Ensure cap is flush with
C
and firmly slide the cap to the left.
the appliance.