Fisher & Paykel ACTIVESMART RS32A72 Installation Manual page 35

Internal box Remove hanging brackets
Remove the M8 washers and M8 nuts from the
1
Door panel
B
M8 studs at the top the door (A) using the hex
attachment kit
key and spanner. Keep the washers and nuts to
reuse later.
Remove the hanging bracket from the top of
2
each door and set aside (B) for later installation.
Side bracket
(10)
Side strap
(10)
#8x16 mush washer
(Custom) screw (34)
Door handle kit
M5x25 pan head socket
screw (12x)
#8 x 16
Mush Washer
Twin Thread
Philips Screw
Tools
Hex key
FPA spanner
Cross-head screwdriver
@0 DOOR PANEL INSTALLATION — CUSTOM
A
B
Attach the door and drawer handles (C)
Align the handle holes with the door panel
3
holes and secure with M5x25 pan head socket
screws (4 per each door panel).
Note: Door handle kit available and must be
purchased separately. Refer to 'Components'
(page 6) for more details.
Attach the hanging brackets (D)
Align the bracket to the holes and secure
4
with #8x16 mush washer screws (14).
Attach side brackets and straps (E)
Align the brackets and straps to the holes on
6
the side of the panel and secure with #8x16
mush washer screws (20).
E
C
C
D
D
E
33