Electrical And Plumbing - Fisher & Paykel ACTIVESMART RS32A72 Installation Manual

IMPORTANT!
Electrical connection should be located in an adjacent cabinet to either side
●
of the appliance or above the appliance cavity.
We recommend to use an isolating switch that is easily accessible to the user
●
after the appliance is installed.
A
1
!0

ELECTRICAL AND PLUMBING

2
B
3
1
B
WARNING!
Electrical shock hazard. Assume all parts are live.
●
Disconnect supply before servicing and installation.
●
ELECTRICAL AND PLUMBING CONNECTIONS
Recommended location for connections in adjacent area or unit
1
Alternative location for connections above the cavity
2
Alternative location for connections at rear of cavity
3
Left side
of cavity
Optional electrical
b
and water connection
location*
Floor
C
Electrical and water connections must be within this space if located
behind the appliance and must not protrude from the back wall.
ELECTRICAL AND PLUMBING DIMENSIONS
Overall height of supply area
A
Overall width of supply area
B
Distance from left side of cavity
C
Distance from the floor
D
Note: Dimensions are based on minimum depth of cavity.
Do not locate water or electricity in this area, keep clear of connections.
CAUTION: Central area can only fit water outlet and electrical plug if they are placed within a recessed cavity.
!
!
* In this location the water tap needs to be recessed into the wall, the recess must allow for an 80mm bend radius for
the water tube.
!
5 15/16"
(150mm)
A
5 15/16"
(150mm)
D
RS32A72 RS36A72
in mm
4 5/16" 110 4 5/16"
2 15/16" 75 2 15/16"
5 1/16" 129 5 1/6"
4 5/16" 110 4 5/16"
110
75
129
110
15