Dimensions apply for the preparation and installation of custom door panels. For Dwg and Dxf files of the below panel preparation download the folder on thekitchentools.fisherpaykel.com.
15 7/16" (392.3mm)
2 3/16" (54.8mm)
Ensure handle is mounted
2 9/16" (65mm) from inner edge
of panel to the center — this will
avoid interference with brackets.
All measurements to be made
from inner bottom corner.
For the second panel mirror
1 3/8" (34.7mm)
and repeat dimensions using
inner bottom corner as the
reference point.
16 5/16" (414mm)
TOP PANEL — REAR VIEW
7
CUSTOM DOOR PANEL INSTALLATION DIMENSIONS — RS36A72
Ø 3/32" (2mm) REF
12x Pilot holes recommended for bracket attachment.
(Do not penetrate front surface).
15 3/16" (385mm)
5 1/16"
(128mm)
1 1/8"
(29.1mm)
All measurements to be made
3 7/16"
from top and centerline.
(87.2mm)
16 3/8" (416mm)
Cut outs are located in attachment bracket for Fisher & Paykel handles only.
If locating custom handle in the shaded area above, ensure handle screw heads
are counter sunk into back of panel to avoid interference with hanging bracket.