Fisher & Paykel ACTIVESMART RS32A72 Installation Manual page 45

Place the side trim against the alcove side wall with the shorter lip facing
5
the bottom (D).
– Ensure the side trim is positioned as high as it will go.
D
short lip
@6 CABINET TRIMS INSTALLATION — [B] FIXED SCREW METHOD
E
Engage the side trim with the brackets by pushing the trim inwards at the
6
locations of the top and middle side trim brackets.
Once the trim has engaged with top and middle brackets, push and engage
7
the side trim at the location of the bottom bracket (E).
Repeat for the remaining side trims.
IMPORTANT!
Each bracket has two engagement points for the trim to locate.
●
Ensure the trim is engaged at both points (F).
Ensure there are no visual gaps between the appliance and side trims.
●
Adjust the gaps by loosening the side trim screws and moving the trim
●
within clearance. If further adjustment is required, relocate brackets to
desired position.
Side trim
Side trim
bracket
F
Top view of side trim engaged
correctly in side trim bracket
Suggestion
engagemen
"ensure the
43