Table of Contents
Advertisement
Checking your cabinetry
Check the dimensions of the cabinetry: height, width, depth, floor level, finished alcove returns. Refer to 'Cavity dimensions' for the correct measurements.
Checking your appliance
Unpack your appliance following the steps printed on the packaging box. Ensure your appliance is the correct model as your order. Ensure components and install kits are complete.
28
Illustrations may differ from your purchased appliance.
BEFORE INSTALLATION
Check the power supply and water connections
Remove the trims kit from the back of
the appliance. Refer to 'Supplied parts'
— Trims install kit for parts included in
the box.
Ensure that there is a separate power socket for each appliance.
Avoid sharing the power point with other appliances to prevent accidental switching off
of the appliance.
For power requirements, refer to the information on the serial plate.
Ensure your appliance is properly grounded.
Connect your appliance to an electrical supply with the fitted plug and lead.
If power connection is located behind the appliance, we recommend to install
an isolating switch to a location that is easily accessible to the user for repair
or disconnection.
Follow local codes and ordinances when installing the appliance.
Remove the installation kit and
miscellaneous items kit from inside
the appliance.
Advertisement
Table of Contents
