Water Supply Connection - Fisher & Paykel ACTIVESMART RS32A72 Installation Manual

IMPORTANT!
Miscellaneous items
(MI) pack
The water connection instructions below are intended only for
●
the professional installer.
The appliance comes with a pre-connected plastic water tubing.
●
Water fittings are not supplied and must be purchased separately.
●
Ensure the appliance is connected to its own isolating switch.
●
Collet locking clip
(1)
Connect to water supply (Ice and Water models only)
Move the appliance in front of the cabinetry close enough that you still have
1
Water fittings kit
access behind for power and water connections (A).
1/4" (6mm) plastic
tubing (1)
1/4" (6mm) Compression
nut (1)
1/4" (6mm) Compression
sleeve (1)
1/4" (6mm) Tube insert
(1)
20
!3

WATER SUPPLY CONNECTION

A
Ensure there is enough tubing for the water connection and to pull
●
the appliance out for service, if required.
Flush water through the hose prior to connection to the appliance
●
to remove any debris in the hose.
Assemble the water fittings components onto the free end of the water
2
tubing.
Insert tube
Secure connection by inserting a locking key (B) to the water fittings and
3
water tubing. Pull gently to ensure it is locked in (C).
D
Connect the water tap adaptor to a water tap (D).
4
– Flush water through the hose prior to connection to the appliance
to remove any debris in the hose.
Turn on the water tap and check all connection are dry and free of drips.
5
Compression Compression Water tubing
sleeve nut
Final water tube connection
B
C