Table of Contents
Advertisement
WARNING!
Electric shock hazard! Assume all parts live. Disconnect supply before servicing
and installation.
Image shown is for single install.
For dual install, each appliance should have a separate power supply connection with only the
freezer having a water connection.
ELECTRICAL SPECIFICATIONS
Supply
Service
Outlet
Power cord (excluding plug)
PLUMBING SPECIFICATIONS
Supply
Pressure kPa (psi)
Water inlet hose
!0
ELECTRICAL AND PLUMBING
Left side of cavity
Floor
Note: We recommend to use an isolating switch that is easily accessible to the user after the
appliance is installed.
ELECTRICAL AND PLUMBING DIMENSIONS
A
B
C
Note: Dimensions are based on minimum depth of cavity.
FREEZER
115VAC, 60Hz
10 amp circuit
3-prong grounding-type
86" (2190mm)
FREEZER
1/4" (6mm) comp. Stainless steel braided hose
min 150 (22) / max 827 (120) @ 68°F (20°C)
83 1/2" (2121mm)
B
REAR OF CAVITY
C
Electrical and water connections must be within this space if located
behind the appliance and must not protrude from the back wall.
Overall height of supply area
Width from the side of the cabinetry
Height at sides of supply area
REFRIGERATOR
115VAC, 60Hz
10 amp circuit
3-prong grounding-type
86" (2190mm)
REFRIGERATOR
NA
NA
83 1/2" (2121mm)
B
A
inches (mm)
9" (229)
1/2" (13)
5" (127)
15
Advertisement
Table of Contents
