Vecow RMS-1000 User Manual page 58

DIO1 group :
Isolate check button :
DIO type of DIO configuration, isolated/non-isolated, defined in SPC-5000
series user manual.
Read button :
Set DIO configuration to get DI/DIO input state.
DO type check button :
User setting, DO type of DIO configuration to setup 8 pins - Source/Sink.
Use for Write (DO) button activate.
Write button :
Set DIO configuration to set DO/DIO output state.
DI preference text :
User setting, DI type of DIO configuration by hexadecimal bitmask - Source/Sink.
Use for Read (DI) button activate.
DO/DIO output text :
User setting, DO/DIO output state by hexadecimal bitmask - on/off.
Use for Write button activate.
DO/DIO writable text :
User setting, DO/DIO writable of DIO configuration by hexadecimal bitmask
- yes/no.
Use for Read (DIO)/Write button activate.
DI/DIO input text (read only):
DI/DIO input state by hexadecimal bitmask – on/off.
Use for Read button activate.
DO/DIO text (read only):
DO/DIO output state with input state (DIO) and configuration.
Use for Write button activate.
DO/DIO output text (read only):
DO/DIO output state with configuration.
Use for Write button activate.
DI type pin check button (pin 8 ~ pin 1):
User setting, DI pin type of DIO configuration - Source/Sink.
DI/DIO input pin texts (read only, pin 8 ~ pin 1/pin 18 ~ pin 11, pin 8 ~ pin 1):
DI/DIO input pin state
Use for Read button activate.
DO/DIO output pin check button (pin 18 ~ pin 11/pin 18 ~ pin 11, pin 8 ~ pin 1):
User setting, DO/DIO output pin state
Use for Write button activate.
DO/DIO pin writable check button (pin 18 ~ pin 11/pin 18 ~ pin 11, pin 8 ~ pin 1):
User setting, DO/DIO pin writable of DIO configuration.
Use for Read (DIO)/Write button activate.
©Vecow RMS-1000 User Manual Appendix A 51