To correct light the boiler, proceed as follows:
• Provide power supply to the boiler.
When the gas boiler is power supplì, the display shows the following information:
1. all symbols alight;
2. manufacture information;
3. manufacture information;
4. manufacture information;
5. Type of boiler and gas used (eg.
The displayed letters mean the following:
= natural boiler chamber
= natural gas mETaNE
6. Hydraulic system;
7. Software version (two numbers x.x);
• open the gas cock;
• press the
button, for at least two seconds, to set the operating boiler mode (see section 3.2).
To display some useful information during the boiler operation proceed as follows:
•
Press the
button for at least 6 seconds until the display shows "a00" (..."a07") alternating with the respective
( )
value (e.g. figure 13);
Figure 13
InstrUctIons pertaInInG to tHe Installer
19. infORmatiOn display
19.1 fiRst displayed infORmatiOn
).
= sealed boiler chamber
= LPG gas
19.2 OpeRatiOn infORmatiOn
17
925.224.2 - GB